產(chǎn)品留言

Fundamental equipment for electronics production

These units has been exclusively designed for vacuum heat treatment such as defoaming, deaerating, hardening or drying, essential processes in the production of electronic components.

Eco model

Thanks to improved air-tightness and sealing capacity, the chamber achieves 20 to 40% savings in energy consumption. (Compared to previous model)

Program operation

Control programs possible by combining temperature and 5 pressure operation modes.

Variety of options

More than 20 options are available to meet customers' needs.

Specifications

Model	Temperature & pressure range	Inside / Outside dimensions (mm)
OVEN-V-91	+40 to +200°C (+104 to +392°F) / 933 to 1×102Pa	W450×H450×D450 / W902×H1392×D780
OVEN-V-216		W600×H600×D600 / W1052×H1532×D930
OVEN-V-512		W800×H800×D800 / W1252×H1772×D1130

Uncompromising energy-saving mechanisms

Max. 40% of energy savings can be achieved through various structure improvements: superior insulation materials' use, enhanced door lock, etc. for better insulation and air-tightness.

Flexible programming of the operation mode

A wide variety of programs can be designed by combining constant and programmed temperature operations with one of the 5 pressure operation modes (Automated operation, continuous operation, open to atmosphere, gas exchange, and ventilation operation) Up to 40 patterns can be set, with 99 steps per pattern programmable.

Double-layered interior construction

The interior of the vacuum chamber is equipped of a double structure. A heater surrounding the internal chamber allows great uniformity performance by minimizing heat loss.

Revamp high-speed processing controller

User-friendly configuration allows easy operation of the different commands. Bright touch panel with speedy information processing.

Register test patterns

Up to 40 patterns for program operation and 3 patterns for constant operation can be registered.

Broad range of options

Over 20 options available to best suit your application.

Expert Mode (Option)

Control of the pressure increase / decrease can be achieved in 6 stages; an operation is memorized when performed the first time and can be called up to accurately repeat the process.

Viewing window (Option)

Slightly curved viewing window, eliminating any exterior reflection.